|
 RFID TurboTag™ Temperature Logger:
click here
Global Sensors
DataWatch™
Loggers
Based on over 15 years of data logging technology and
experience, the DataWatch™
Temperature and Temperature and Humidity Logger products
are proven performers.
DataWatch™
loggers
are available with an internal sensor or a combination of
internal and/or external sensors that plug into the body of
the logger and have stainless steel probes at the end of
cables. With
16,000 data points capability as standard (2,000 data points
optional with the internal sensor unit), the DataWatch™
loggers communicate via the DataWatch™
interface system to the PC using the powerful and easy-to-use
Windows-based software to program the units or obtain
data.
With a single keystroke the DataWatch™
can be reset for another usage cycle. With a
simple-to-replace camera-type battery, the DataWatch™
is
both reliable and user-friendly for years of continuous
usage.
Starter Kit
All DataWatch™ loggers are hermetically
sealed and are started by either an activation magnet (3
below) or a
user-programmed "wake up" time.
DataWatch™ emits a confirming "I'm now running" tone
when activated. All DataWatch™ loggers are read by
placing them into the standard interface cradle (2 below). The
cradle is attached to a PC computer that runs DataWatch™
software. The cradle, activation magnet and software are
part of a startup kit that is required for activating and
reading any DataWatch logger product. Of course, you
only need one kit to activate and read multiple DataWatch™
loggers.
Add to Cart |
Starter Kit (1, 2, and 3) $75.00
Includes
software disk, interface cradle with serial cable and
plug, and one key ring starter magnet |
|
Add to Cart |
2.
Interface Cradle
$68.00 (Separate purchase of
interface cradle only) |
|
Add to Cart |
3. Starter Magnet $7.50
(Separate purchase of key ring start magnet only) |
DataWatch™ Software is free for trial and evaluation and
may be downloaded for use with DataWatch™ products.
Click here to download.
Internal Sensor Model
The DataWatch internal sensor model is the
workhorse of the
 DataWatch™
line. They are water resistant and can be used in cold
rooms, floated on water baths, suspended in hot or cold
controlled temperature environments or just about anywhere you
need to know temperature in the normal chill to room
temperature range.
|
Add to Cart |
DataWatch Internal Sensor $89.00
Requires starter kit to
read (see above). |
External Sensor Models
The DataWatch™ product line includes a complete selection of
external sensor logger products with one or two external
sensors, options for display and other features. All
external sensor models have a reference internal sensor and
use the standard download cradle. Click below for
descriptions, technical information and for purchasing:
Humidity Model
The DataWatch™ also comes in a combined temperature and
 humidity model.
This unit is a highly accurate, extremely responsive and
easy-to-operate temperature and humidity data collecting
system. With a temperature reading range of
-4°F to
+140°F and a humidity recording range of 0-100%RH this unit
provides you with everything you need to monitor temperature
and humidity data for most any application.
|
Add to Cart |
DataWatch™
Humidity Model $260.00
One year
warranty.
Requires starter kit to
read (see above). |
|
Add to Cart |
 DataWatch™
Humidity Protective Cap $13.58
Extremely useful accessory
for the humidity model. Protects the sensor from
dust and dirt and/or dripping water in very humid test
environments. Extends the useful life of the
instrument between calibrations. Threaded cap screws
on to same threads as the protective cage. Open cell
foam does not compromise humidity reading. |
DataWatch™
Stainless Steel and Specialized Loggers
The
DataWatch™
has a complete line of loggers aimed at specialized technical
applications, including egg surrogate loggers, high
temperature and pressure loggers for autoclave and cooking
applications and special interfaces and enclosures to protect
DataWatch™
from hazardous or extreme conditions.
From stainless steel cases or thermocouple
inputs for high temperature applications to specialized
uses such as monitoring food pasteurization and autoclave
processes, the DataWatch™
is likely to have a logger type that will satisfy your
monitoring requirements. Contact Global Sensors to
discuss your monitoring application - if we don't have a
solution, we'll do everything we can to point you in the right
direction.
LogTag™
Logger
LogTag™
has been designed to meet growing demand for cost effective
electronic temperature recording devices. Combining
state-of-the-art technology and innovative design, the LogTag™
provides a simple and cost-effective solution for accurate
time and temperature monitoring.
 
|
1
3
1
2
3
designed to meet the growing demand for cost effective
electronic temperature & humidity recording solutions. Combining
state of the art technology, innovative design and high volume
manufacturing techniques, the LogTag™ recorder system provides
the most cost effective, high performance humidity data logging
system available for today's market. One LogTag™ Starter
Kit is required for operation.
quality and accurate wireless loggers.
Wireless loggers do not require a direct connection to a PC
computer for transfer of data; they can be "interrogated" by
using T&D's unique handheld Data Collector.
